var offer_details={"content":"

数字音频SPDIF Splitter 4 In 2 Out、光纤4进2出、光纤4X2矩阵

本公司所生产设备为以下应用提供解决方案：如对噪声、传输距离及安全有限制的场所、数据中心控制、信息分配、会议室演示以及教学环境和公司培训场所。

本公司真诚希望能够以优惠的价格提供给客户最好的产品。产品所售价格包含了来自公司卓越工程师团队的终身技术支持服务。

产品特点：

l 四路光纤信号输入切换或分配到两路光纤信号输出

l 支持音频格式DTS-HD/Dolby-trueHD/LPCM2.0/DTS/DOLBY-AC3/DSD

l 支持信号时序重整

l 使用线损小于0.2dB/m线览，输出距离可达40m

l 输入端可以通过红外线遥控进行切换，也可以直接摁按钮进行切换。

l 支持断电记忆

l 过电压保护功能，防止接错电源适配器造成机器损坏，当待机指示灯闪烁时，表明电源适配器电压高过，请更换电源适配器。

l LED状态指示，使产品各工作状态一目了然。

l 无信号损失

l 安装简单

l 外置5V/500mA电源适配器

产品规格:                                       

支持音频格式……………………DTS-HD/Dolby-trueHD/LPCM2.0/DTS/Dolby-AC3/DSD

峰值波长 ………………………………………………………………………………650nm

最大传输速率…………………………………………………………………………16Mbps

输出线缆长度…………………………………………≤40m，使用线损小于0.2dB/m线览

最大工作电流…………………………………………………………………………100mA

电源适配器规格……………交流输入 (50HZ, 60HZ) 100V-240V; 直流输出5V/500mA

工作温度范围…………………………………………………………………(0 to +40℃)

工作湿度范围………………………………………………………5 to 90%RH (无冷凝)

尺寸(长*宽*高)……………………………………………………………68x128x34(mm)

重量………………………………………………………………………………………185g

 

SPDIF TOSLINK Digital Optical Audio True Matrix 4x2 Switch Splitter 4 In 2 Out Video Converter with Remote Control EU Plug Black
This Spdif 4x2 audio matrix could put the four sets of spdif output signal source and two spdif input device connected.It can be easily split or switched between four spdif signal and two spdif signal receiving equipment.
Features:
Audio format support : DTS-HD/Dolby-trueHD/LPCM2.0/DTS/Dolby-AC3/DSD
Support signal retiming
Used optical fiber cable loss less the 0.2Db/m, Output distance is up to 40m
The input control can through R/M and also can directly press the button
Support last time working state memory when power off
Over-voltage protection can prevent the damage caused by connecting unmatched power adapter to the machine,if the light for standby indication flashed, it shows that the output voltage from the power adaptor is too high and the adaptor needs to be changed
LED status indication, it can tell us the working state of the device very easily
No loss of quality
Install in minutes
Need DC5V/1A power supply
Specifications:
Supporting audio format: DTS-HD/Dolby-trueHD/LPCM2.0/DTS/Dolby-AC3/DSD
Peak wavelength:650nm
Max baud rate:16Mbps
Output cable distance:up to 40m(Use the optical fiber cable loss less the 0.2Db/m )
Max working current:100mA
Input:AC (50HZ, 60HZ) 100V-240V
Output:DC5V/500mA
Operating Temperature range:0 to 40 degrees Celsius
Operating Humidity range:5 to 90%RH (No Condensation)
Dimension:68 x 128 x 34mm(L x W x H)
Operating and Connecting:
1.To use the optical fiber cable to connect the optical fiber signal source (such as blue-ray player, the computer and so on) with the matrix input
2.To let the matrix output port connect to the optical fiber signal receiver (such as amplifier, home theater and so on) by using the optical cable
3.Connect 5V power supply to the matrix DC input port
4.Through the remote or button to switch the input source freely
Switch only, other device not included.

\"undefined\"

\"undefined\"

\"undefined\"

\"undefined\"

\"undefined\"

\"undefined\"

\"undefined\"

\"undefined\"

"};